Line - Digi PortServer/8 User Manual

value
xona=
Use to set the auxiliary XON Character you prefer. Default= ^Q (<Ctrl-Q>)
value
xoffa=
Use to set the auxiliary XOFF Character you prefer. Default=^S (<Ctrl-S>)

line

Syntax:
set line
Use line to view or modify serial line parameters. Use set line range= to specify a single
port or group of ports. Options are:
baud break
onlcr otab
Each of the preceding will have their own options, as outlined in the following descriptions.
(More than one option can be included in a command.)
baudrate
baud=
Use to set the baud rate for the port. Legal values are:
50
110
150
300
| send | escape
break=ignore
Used to ignore (default), or send an escape sequence when a telnet break command
is seen.
| 6 | 7 | 8
csize=5
Sets the Character size. Can be 5, 6, 7 or 8 bits per character. Default= 8
| null | parmk | dos
error=ignore
Tells the PortServer software what to do with parity errors. It can ignore the error
(default), change the error character to a null, or mark the error with an FF.
| off
inpck=on
Turn on or off input parity checking. Default= off
| off
istrip=on
When ON, strips the high order bit in each byte. Default= off
Page 48 Ÿ Command Reference
option=value
csize
parity
600 3600 19200
1200 4800 38400
1800 7200 57600
2400 9600
error inpck
range save
istrip
stopb