Keys - Digi PortServer/8 User Manual

keys

Syntax:
set keys
Use keys to define the local key combinations for various functions. The different keys that can
be set are:
eof erase
tesc xon
Each of the preceding will have their own options, as outlined in the following descriptions. Use
to specify a single port or group of ports.
set keys range =
More than one option can be included in a command.
If the character is a control character, the carat character ( ^ ) must be used to indicate
that the Ctrl key should be held while pressing the key. (For example, <Ctrl-C> must
be entered as the two characters ^C .)
end_of_file_character. Default= ^D (<Ctrl-D>)
eof=
erase_character. Default= ^H (<Ctrl-H>)
erase=
interrupt_character. Default= ^C (<Ctrl-C>)
intr=
kill_character. Default= ^U (<Ctrl-U>)
kill=
startport# - endport#
range=
Specify a range of ports to be modified.
| off
save=on
Save or do not save the changes to EEPROM.
value
tesc=
Set the telnet escape character (used to break out of telnet sessions either to the
PortServer shell or to other telnet sessions). Default= ^] (Control Right-Bracket)
value
xon=
Use to set the XON Character you prefer. Default= ^Q (<Ctrl-Q>)
value
xoff=
Use to set the XOFF Character you prefer. Default= ^S (<Ctrl-S>)
option=value
intr kill
xoff xona
range save
xoffa
PortServer Terminal Server Ÿ Page 47