Digi PortServer/8 User Manual page 65

• •
(Also see set port auto on page 51, which is similar except that a port is set up
so that any user on that port will bypass the PortServer's command shell and
automatically connect to the defined destination.)
•
Important! login must be set to on for Auto users—see set logins login= on
page 50.
newusername name= oldusername
set users newname=
This is used to change the user name oldusername already in the table to the new
name newusername.
set users rmuser=username
This form of the command is used for removing entries from the users table, and
removes the entery that refers to username.
set users rmuser=on range=range
This form is used to remove entries from the table by index numbers, which can be
found in the table listing by typing set users with no other options.
You may define up to 16 user table entries.
PortServer Terminal Server Ÿ Page 57