Digi PortServer/8 User Manual page 58

character_string
cmdprompt=
Use to define the PortServer command prompt. Default is digi> . (The root prompt
of ># cannot be changed.)
character_string
logprompt=
Use to define the login prompt (up to 11 characters). Default is login: . Root
privileges required.
| off
login=on
Use to set whether the user is required to log in before using terminal. Default= on .
Root privileges required. Important! login must be ON for Auto users.
| off
write=on
Use to set whether the user (other than root) can save to the EEPROM. Default= off
(user cannot write to EEPROM). Root privileges required.
character_string
passprompt=
Use to define the login password prompt. Root privileges required. Default is
passwd:
| off
passwd=on
Use to set whether the user is required to give a password before using terminal.
Default= on
startport# - endport#
range=
Specify a range of ports to be modified.
| off
save=on
Save the changes to EEPROM.
| off
verbose=on
Use to eliminate "connection" messages before the login prompt. (Useful to batch
programmers.) Default= on
Page 50 Ÿ Command Reference