Digi PortServer/8 User Manual page 87

telnet example:
set users name=martha passwd=on dport=23 dest=192.1.2.3 auto=on
Auto connect user w/o password
This is the same as "Auto Connect User with Password," but set up with " passwd=off " added
to the command line.
Auto-Connect Port
Auto Connect Port connects a specified port to a specified host no matter what user logs in
through it. This dedicates a port to be a connection with a specific system only. A user on an
auto-connected port can never escape to the PortServer command line, run multiple session, or
otherwise connect to a different system.
See Set Ports Auto on page 51.
Auto-Connect port causes any port activity (such as a received character on a tty port, or a DCD
high transition on a modem port) to automatically connect to a specified system. No access to
the PortServer command line is allowed.
If configured with set port dport=23 , the connection uses telnet protocol.
If configured with set port dport=0 uid=X , the connection uses the "rlogin" protocol with the
username for PortServer user X if the user index X is valid.
If configured with set port dport=513 uid=X , the connection uses the "rlogin" protocol with
the username for PortServer user X.
Rlogin example:
set port range=8-9 auto=on dport=0 uid=7 dest=192.1.2.3
telnet example:
set port range=5-7 auto=on dport=23 dest=192.1.2.3
PortServer Terminal Server Ÿ Page 79