Logins; Character Strings - Digi PortServer/8 User Manual

| off
onlcr=on
Use to map (ON) or not to map (OFF) NEWLINE characters to CR-NEWLINE on
output. Default= off
| off
otab=on
Converts output tabs to eight spaces. Default= off
| E | N
parity=O
Use to select Odd, Even or No parity. Default= N (no parity).
startport# - endport#
range=
Specify a range of ports to be modified.
| off
save=on
Save the changes to EEPROM.
| 2
stopb=1
Use to set the Stop Bits to 1 or 2. Default= 1

logins

Syntax:
set logins
Use this command to activate/deactivate login and password protection, define prompts and
startup messages. set logins range= is used to specify multiple ports, or one specific port.
Options are:
cmdprompt
passprompt
verbose

Character Strings

Many of the values entered for logins are character strings. To include a space in a character
string, enclose the entire string in quotation marks. For example, to change the PortServer
login prompt to Enter login: , type:
set logins logprompt="Enter login:"
Each of the preceding will have their own options, as outlined in the following descriptions.
(More than one option can be included in a command.)
option=value
logprompt
passwd
login
range
PortServer Terminal Server Ÿ Page 49
write
save