Remote Access Commands; Close; Mode - Digi PortServer/8 User Manual

Remote Access Commands

The commands in this section are remote access related.
Syntax:

close

Closes the current tcp session (the session last escaped from) to reenter the PortServer operating
system's command mode.
Syntax:

mode

The mode command is used to display telnet operating parameters.
#> mode
tty bin crmod
15 off off
15 on off
bin
Enter mode bin=on or mode bin=off to turn bin (binary characters, both
directions) on or off. Default= off
crmod
Enter mode crmod=on or mode chmod=off to turn crmod on or off. This adds
line feed characters (010 dec) to and received carriage returns (013). This does
not affect any characters you type. (<CR> becomes <CR><LF>) Default= off
crlf
Enter mode crlf=on or mode chlf=off to turn crlf on or off. This adds line
feed characters (010 dec) to and sent carriage returns (013). This does not affect
any characters you receive. (<CR> becomes <CR><LF>) Default= off
Page 60 Ÿ Command Reference
[ option=offlow ]
crlf sess hostname
off 1 poe
off 2 ctsi
close
mode