Table of Contents
Advertisement
6.18
Idle speed adjusting screw
6.19
Shift lever
Possible states
The cold start button is activated – The cold start button is
•
pushed in all the way.
The cold start button is deactivated – The cold start button is
•
in its basic position.
The idle setting of the throttle valve body substantially influences
the vehicle's starting behavior, a stable idle speed, and the vehi-
cle's response when the throttle is opened.
An engine with a correctly set idle speed is easier to start than an
engine with the idle speed set incorrectly.
The idle speed is adjusted using the idle speed adjusting
1
screw
.
Info
If the idle speed is high, the engine is slow to run, the
S05514-10
engine brake is low and the throttle response is aggressive,
the adjusting screw must be turned counterclockwise.
If the idle speed is low, the engine is running fast, the
engine brake is high and the throttle response is not clean,
the adjusting screw must be turned clockwise.
For optimum performance, it is recommended to adjust the
idle speed using the dedicated functions in the diagnostics
tool.
1
Shift lever
is mounted on the left side of the engine.
401950-10
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
401950-11
CONTROLS 6
21
Advertisement
Table of Contents
