Checking The Headlight Setting; Adjusting The Headlight Range - KTM 150 XC-W 2018 Owner's Manual

15 ELECTRICAL SYSTEM
15.8
15.9
110
E00359-10

Checking the headlight setting

400726-10

Adjusting the headlight range

–
3
Pull out headlight bulb
–
Insert the new headlight bulb.
Headlight (HS1/socket BX43t) (
–
Insert the protection cap with the bulb socket into the reflector
and turn it clockwise all the way.
Info
Ensure that O-ring
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a mark at the height of the center of the
low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle vertically a distance
wall.
Guideline
A
Distance
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on
the lower mark for a motorcycle with rider.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
.
p. 147)
4
is seated properly.
p. 109)
p. 110)
B under the first mark.
5 cm (2 in)
A
away from the
5 m (16 ft)
p. 110)
p. 110)