Restore Custom Default; Reboot The Switch; Logging Out Of The Web Configurator; Help - ZyXEL Communications XGS1930-38 User Manual

4.7.2 Restore Custom Default

Press the RESTORE button for three to six seconds to have the Switch automatically reboot and restore
the saved custom default file. See

4.7.3 Reboot the Switch

Press the RESET button to reboot the Switch without turning the power off. See
more information about the LED behavior.

4.8 Logging Out of the Web Configurator

Click Logout in a screen to exit the web configurator. You have to log in with your password again after
you log out. This is recommended after you finish a management session for security reasons.
Figure 37 Web Configurator: Logout Screen

4.9 Help

The web configurator's online help has descriptions of individual screens and some supplementary
information.
Click the Help link from a web configurator screen to view an online help description of that screen.
Chapter 4 The Web Configurator
Section 3.3 on page 32
XGS1930 Series User's Guide
54
for more information about the LED behavior.
Section 3.3 on page 32 for