Wizard - ZyXEL Communications XGS1930-38 User Manual

4.3 Wizard

Wizard displays Basic, Protection, VLAN, and QoS.
Basic
In Basic, you can set up IP/DNS, set up your password, SNMP community, link aggregation, and view
finished results.
In order to set up your IP/DNS, please do the following. Click Wizard > Basic > Step 1 IP to access this
screen.
Figure 26 Wizard > Basic > Step 1 IP
Each field is described in the following table.
Table 6 Wizard > Basic > Step 1 IP
LABEL
Host Name
IP Interface
VID
IP Address
IP Subnet Mask
Default Gateway
Chapter 4 The Web Configurator
DESCRIPTION
This field displays a host name.
Select DHCP Client if the Switch is connected to a router with the DHCP server enabled. You
then need to check the router for the IP address assigned to the Switch in order to access
the Switch's web configurator again.
Select Static IP Address when the Switch is NOT connected to a router or you want to assign
it a fixed IP address.
This field displays the VLAN ID.
The Switch needs an IP address for it to be managed over the network.
The subnet mask specifies the network number portion of an IP address.
Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
XGS1930 Series User's Guide
40