Pppoe Ia Per-Port - ZyXEL Communications XGS1930-38 User Manual

Table 104 Advanced Application > PPPoE > Intermediate Agent (continued)
LABEL
Apply
Cancel

28.3.1 PPPoE IA Per-Port

Use this screen to specify whether individual ports are trusted or untrusted ports and have the Switch
add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent on
the Switch and there are no trusted ports.
Click the Port link in the Intermediate Agent screen to display the screen as shown.
Figure 152 Advanced Application > PPPoE > Intermediate Agent > Port
The following table describes the labels in this screen.
Table 105 Advanced Application > PPPoE > Intermediate Agent > Port
LABEL
Port
*
Chapter 28 PPPoE
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This field displays the port number. * means all ports.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
XGS1930 Series User's Guide
219