Table of Contents
Advertisement
You forgot to log out of the Switch from a computer before logging in again on another computer.
9
Note: Be careful not to lock yourself and others out of the Switch.
4.8 Reset the Switch
If you lock yourself (and others) from the Switch or forget the administrator password, you will need to
reload the factory-default configuration file or reset the Switch back to the factory defaults.
4.8.1 Restore Button
Press the RESTORE button for 7 to 10 seconds to have the Switch automatically reboot and restore the
factory default file. See
4.8.2 Restore Custom Default
Press the RESTORE button for 3 to 6 seconds to have the Switch automatically reboot and restore the last-
saved custom default file. See
4.8.3 Reboot the Switch
Press the RESET button to reboot the Switch without turning the power off. See
more information about the LED behavior.
4.9 Log Out of the Web Configurator
Click Logout in a screen to exit the Web Configurator. You have to log in with your password again after
you log out. This is recommended after you finish a management session for security reasons.
Figure 46 Web Configurator: Logout Screen
4.10 Help
The Web Configurator's online help has descriptions of individual screens and some supplementary
information.
Click the Help link from a Web Configurator screen to view an online help description of that screen.
Chapter 4 Web Configurator
Section 3.3 on page 40
for more information about the LED behavior.
Section 3.3 on page 40
XS1930 Series User's Guide
67
for more information about the LED behavior.
Section 3.3 on page 40
for
Advertisement
Table of Contents
Troubleshooting
