ZyXEL Communications XGS1930-38 User Manual page 58

Figure 40 Initial Setup Example: Management IP Address
Connect your computer to any Ethernet port on the Switch. Make sure your computer is in the same
1
subnet as the Switch.
Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar to access the
2
web configurator. See
Click Basic Setting > IP Setup > IP Configuration in
3
the navigation panel.
Configure the related fields in the IP Configuration
4
screen.
For the VLAN2 network, enter 192.168.2.1 as the IP
5
address and 255.255.255.0 as the subnet mask.
In the VID field, enter the ID of the VLAN group to
6
which you want this management IP address to
belong. This is the same as the VLAN ID you
configure in the Static VLAN screen.
Click Add to save your changes back to the run-
7
time memory. Settings in the run-time memory are
lost when the Switch's power is turned off.
Chapter 5 Initial Setup Example
Section 4.2 on page 36
XGS1930 Series User's Guide
58
for more information.