Reset The Switch; Restore Button; Restore Custom Default; Reboot The Switch - ZyXEL Communications XGS1930-28 User Manual

You forgot to log out of the Switch from a computer before logging in again on another computer.
9
Note: Be careful not to lock yourself and others out of the Switch.

4.8 Reset the Switch

If you lock yourself (and others) from the Switch or forget the administrator password, you will need to
reload the factory-default configuration file or reset the Switch back to the factory defaults.

4.8.1 Restore Button

Press the RESTORE button for 7 to 10 seconds to have the Switch automatically reboot and restore the
factory default file. See

4.8.2 Restore Custom Default

Press the RESTORE button for 3 to 6 seconds to have the Switch automatically reboot and restore the last-
saved custom default file. See

4.8.3 Reboot the Switch

Press the RESET button to reboot the Switch without turning the power off. See
more information about the LED behavior.

4.9 Log Out of the Web Configurator

Click Logout in a screen to exit the Web Configurator. You have to log in with your password again after
you log out. This is recommended after you finish a management session for security reasons.
Figure 45 Web Configurator: Logout Screen

4.10 Help

The Web Configurator's online help has descriptions of individual screens and some supplementary
information.
Click the Help link from a Web Configurator screen to view an online help description of that screen.
Chapter 4 Web Configurator
Section 3.3 on page 37 for more information about the LED behavior.
Section 3.3 on page 37
XGS1930 Series User's Guide
63
for more information about the LED behavior.
Section 3.3 on page 37 for