Getting To Know Your Switch; Introduction; Management Mode - ZyXEL Communications XGS1930-38 User Manual

Getting to Know Your Switch

1.1 Introduction

This chapter introduces the main features and applications of the Switch. The XGS1930 Series consists of
the following models:
• XGS1930-28
• XGS1930-28HP
• XGS1930-52
• XGS1930-52HP
Referring to PoE model(s) in this User's Guide only applies to XGS1930-28HP and XGS1930-52HP.
The Switch is a smart managed switch with one power slot for single power supply. The Switch provides
four SFP+ slots for uplink. By integrating static route functions, the Switch performs wire-speed layer-3
routing in addition to layer-2 switching.
The Switch supports NebulaFlex for hybrid mode which can set the Switch to operate in either
standalone or Nebula cloud management mode. When the Switch is in standalone mode, it can be
configured and managed by the web configurator. When the Switch is in Nebula cloud management
mode, it can be managed and provisioned by the Zyxel Nebula Control Center (NCC). See
on page 104
The following table describes the port features of the Switch by model.
Table 1 GS1920v2 Series Comparison Table
SWITCH MODELS
10/100/1000 Mbps
Ethernet Ports
10/100/1000 Mbps
PoE Ports
1/10 Gbps SFP
interface
FAN

1.1.1 Management Mode

The Switch can work either in standalone mode or in Nebula cloud management mode.
Standalone
By default, the Switch is to be configured using its built-in web configurator. See
35 for detailed information about the web configurator screens.
for more information.
XGS1930-28
24
-
4
-
XGS1930 Series User's Guide
C
XGS1930-28HP XGS1930-52
24
24
4
2
18
H A P T E R
XGS1930-52HP
48 48
- 48
4 4
2 3
Section Part II on page
1
Section 8.12