ZyXEL Communications XGS1930-38 User Manual page 167

Figure 122 Advanced Application > Port Authentication > MAC Authentication
The following table describes the labels in this screen.
Table 75 Advanced Application > Port Authentication > MAC Authentication
LABEL DESCRIPTION
Active Select this check box to permit MAC authentication on the Switch.
Note: You must first enable MAC authentication on the Switch before configuring it
Name Prefix Type the prefix that is appended to all MAC addresses sent to the RADIUS server for
authentication. You can enter up to 32 printable ASCII characters.
If you leave this field blank, then only the MAC address of the client is forwarded to the RADIUS
server.
Password Type the password the Switch sends along with the MAC address of a client for authentication
with the RADIUS server. You can enter up to 32 printable ASCII characters.
Chapter 18 Port Authentication
on each port.
XGS1930 Series User's Guide
167