Download  Print this page


Starting Remote UI

To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.
Check the IP address set to the machine in advance (
ask your Network Administrator.
Start the Web browser.
Enter "http://<the IP address of the machine>/" in the address field, and press the
[ENTER] key.
If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://
If a security alert is displayed
A security alert may be displayed when the Remote UI communication is encrypted (
Key and Certificate for TLS(P. 160) ). When certificate settings or TLS settings have no errors, continue
browsing the Web site.
Log in to the Remote UI.
When a System Manager PIN is not set
Select [System Manager Mode] or [General User Mode].
[System Manager Mode]
You can perform all the Remote UI operations and settings.
[General User Mode]
You can check the status of documents or the machine, and you can also change some of the settings. When
you want to check if a specific document of yours is in the print queue or cancel the printing of a document
of yours in the print queue, enter the user name of the document in [User Name]. The user name is
automatically set to print documents based on information such as your computer name or computer login
[Remote UI Access PIN]
If [Remote UI Access PIN] is set, enter the PIN.
Managing the Machine
Viewing Network Settings(P. 44) ). If you have any questions,
Setting a Remote UI PIN(P. 147)
Configuring the


Table of Contents

   Also See for Canon imageClass LBP162dw

   Related Manuals for Canon imageClass LBP162dw

Comments to this Manuals

Symbols: 0
Latest comments: