Download  Print this page

Advertisement

Standard TCP/IP Port
Adding an MFNP port
1
Click [Add Port].
2
Select [Canon MFNP Port] in [Available port types] and click [New Port].
3
Select [Auto Detect] and select the machine when it is detected, and then click [Next].
If the machine is not detected
Click [Refresh]. If the problem persists, select [IP address] or [MAC address], enter the IP address or
MAC address of the machine (
4
Click [Add]
[Finish].
5
Click [Close].
Adding a standard TCP/IP port
1
Click [Add Port].
2
Select [Standard TCP/IP Port] in [Available port types] and click [New Port].
3
Click [Next].
4
Enter the IP address or the DNS name of the machine, and click [Next].
The [Port Name] is entered automatically. If necessary, you can change it.
Setting Up
This is a standard Windows port. When you use this type of port, you need to add a
new port every time that the IP address of the machine is changed. Select this type of
port when you are using the machine in an IPv6 environment and when you cannot
add an MFNP port.
Viewing Network Settings(P. 44) ) and then click [Next].
50

Advertisement

Table of Contents

   Also See for Canon imageClass LBP162dw

   Related Manuals for Canon imageClass LBP162dw

Comments to this Manuals

Symbols: 0
Latest comments: