Download  Print this page


Entering Sleep Mode

The sleep mode function reduces the amount of power consumed by the machine by disabling power flow to the
operation panel. If no operations is performed on the machine for a while, such as during a lunch break, the machine
enters sleep mode automatically.
When in sleep mode
When the machine enters sleep mode, the display turns off.
Situations in which the machine does not enter sleep mode
When the machine is in operation
When the Job indicator is lit up or blinking
When the machine is performing an operation such as adjustment or cleaning
When a paper jam occurs
When the menu screen is displayed
When an error message is displayed on the screen (There are some exceptions. The machine sometimes
enters sleep mode when an error message is displayed.)
When the machine is waiting for a wireless LAN connection or Direct Connection
Changing the Auto Sleep Time Value
Auto Sleep Time is a function that automatically puts the machine into the sleep mode if it remains idle for a
specified length of time. We recommend using the factory default settings (
reduce power usage. If you want to change the amount of time that elapses before the machine enters the auto
sleep mode, perform the procedure below.
machine automatically enters sleep mode
Exiting Sleep Mode
You can press any key other than the power switch to exit the sleep mode.
Basic Operations
<Timer Settings>
<Auto Sleep Time>
Set the amount of time that elapses before the
<Timer Settings>(P. 210) ) to


Table of Contents

   Also See for Canon imageClass LBP162dw

   Related Manuals for Canon imageClass LBP162dw

Comments to this Manuals

Symbols: 0
Latest comments: