Download  Print this page

Setting Up Connection By Selecting A Wireless Router - Canon imageClass LBP162dw User Manual

Hide thumbs

Advertisement

Setting Up Connection by Selecting a Wireless Router

You can search the wireless routers (or access points) available for connection and select one from the display of the
machine. For the network key, enter a WEP key or PSK. Before selecting a wireless router, check and write down the
required setup information, including the SSID and network key (
Security settings
If the wireless connection is set up by selecting a wireless router, the WEP authentication method is set to
<Open System> or the WPA/WPA2 encryption method is set to <Auto> (AES-CCMP or TKIP). If you want to
select <Shared Key> for WEP authentication or <AES-CCMP> for WPA/WPA2 encryption, you need to set up
the connection using <Enter Manually>.
1
Select <Menu> in the Home screen.
2
Select <Network Settings>.
If the screen for entering a PIN appears, enter the correct PIN.
3
Select <Wireless LAN Settings>.
If the <Direct Connection will be disabled. Is it OK?> message is displayed, select <Yes>.
4
Read the message that is displayed, and select <OK>.
5
Select <SSID Settings>.
6
Select <Select Access Point>.
The machine starts searching for available wireless routers.
If a message is displayed telling that access point cannot be found, see
Message(P. 285) .
7
Select a wireless LAN router.
Select the router whose SSID matches the one that you have written down, and press
Setting Up
Checking the SSID and Network Key(P. 36) ).
Setting Up Connection by Specifying Detailed Settings(P. 33)
Home Screen(P. 87)
31
Setting the System Manager PIN(P. 145)
Countermeasures for Each
.
23FJ-00K

Advertisement

Table of Contents

   Also See for Canon imageClass LBP162dw

   Related Manuals for Canon imageClass LBP162dw

Comments to this Manuals

Symbols: 0
Latest comments: