Download  Print this page


Setting IPv4 Address

Setting IPv4 Address(P. 38)
Testing the Network Connection(P. 39)
Setting IPv4 Address
Select <Menu> in the Home screen.
Select <Network Settings>.
If the screen for entering a PIN appears, enter the correct PIN.
Select <TCP/IP Settings>
Configure IP address settings.
<Auto Acquire>
Select to automatically assign an IP address via DHCP protocol. When <On> is displayed, automatic
addressing is enabled.
<Manually Acquire>
Select to configure the IP address settings by manually entering an IP address. In order to select this option,
the automatic acquirement must be set to <Off>.
<Check Settings>
Select when you want to view the current IP address settings.
Automatically assigning an IP address
Select <Auto Acquire>.
Select the protocol.
Select <Select Protocol>
If you do not want to use DHCP/BOOTP/RARP to assign an IP address
Setting Up
The machine's IPv4 address can be either assigned automatically by a dynamic IP
addressing protocol, such as DHCP, or entered manually. When connecting the
machine to a wired LAN, make sure that the connectors of the LAN cable are firmly
inserted into the ports (
network connection if necessary.
Home Screen(P. 87)
<IPv4 Settings>
Connecting to a Wired LAN(P. 24) ). You can test the
Setting the System Manager PIN(P. 145)
<IP Address Settings>.


Table of Contents

   Also See for Canon imageClass LBP162dw

   Related Manuals for Canon imageClass LBP162dw

Comments to this Manuals

Symbols: 0
Latest comments: