Canon imageClass LBP162dw User Manual page 294

Connecting Directly (Access Point Mode)(P. 126)
Could not perform cleaning.
Paper jammed during cleaning.
● Remove the jammed paper, set paper correctly, and perform cleaning again.
Clearing Paper Jams(P. 297)
Cleaning the Fixing Assembly(P. 242)
Could not perform Shared Key auth. Check WEP settings.
The network key (the WEP key) of a wireless router to be connected is not set to the machine correctly.
● Check the network key (the WEP key) of the wireless router, and set it to the machine again.
Checking the SSID and Network Key(P. 36)
Setting Up Connection by Specifying Detailed Settings(P. 33)
● Connect again by selecting a wireless router or by manually changing the WEP authentication method to
<Open System>.
Setting Up Connection by Selecting a Wireless Router(P. 31)
Setting Up Connection by Specifying Detailed Settings(P. 33)
The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to
"Open System."
● Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For
more information about how to change, see the instruction manuals for your networking devices or
contact your manufacturer.
Could not set the current date and time.
The communication failed due to a network error and a timeout occurred.
● Check the network environment that the machine connects with.
● Use <Current Date/Time Settings> to set the time manually, or, in [SNTP Settings], clear the [Use SNTP]
check box.
Setting the Current Date and Time(P. 19)
Configuring SNTP(P. 69)
Could not update the device time because its battery has run out. Cannot
use Google Cloud Print if the time settings are incorrect.
The machine's battery has run out and the correct time settings could not be kept.
● Set the correct time again.
Setting the Current Date and Time(P. 19)
Troubleshooting
289