Download  Print this page

Advertisement

<Common Settings>
All the settings related to the paper feed method are listed with descriptions. Default settings are marked with a
dagger ( ).
<Switch Paper Feed Method>
Specify this setting when you print a document on paper with logos. In general use, to print on paper with logos, you
need to change how the paper loaded in the paper source is facing depending on whether you are performing 1- or 2-
sided printing. However, if you change the setting to <Print Side Priority>, you can just load the paper with the logo
side facing down for 1-sided printing in the same way as for 2-sided printing.
<Multi-Purpose Tray>
<Speed Priority>
<Print Side Priority>
<Drawer 1>
<Speed Priority>
<Print Side Priority>
<Menu>
<Speed Priority> or <Print Side Priority>
Paper Sources
Select the paper source that you want to change the setting for.
<Speed Priority>
When using paper that has been preprinted with a logo, you need to change how it is facing when you
perform 1-sided and 2-sided printing.
We recommend selecting <Speed Priority> if you do not need to consider which side to print on.
<Print Side Priority>
To print on a specific side of paper, you do not need to flip over paper in the paper source whether 1- or 2-
sided printing is selected.
If <Print Side Priority> is set for a paper source that is loaded with paper you cannot use for 2-sided
printing (
Available Paper(P. 317) ), <Speed Priority> is applied to the paper source instead. In this case,
Setting Menu List
<Common Settings>
<Switch Paper Feed Method>
Loading Preprinted Paper(P. 103) .
213
Select the paper source
23FJ-06J
Select

Advertisement

Table of Contents

   Also See for Canon imageClass LBP162dw

   Related Manuals for Canon imageClass LBP162dw

Comments to this Manuals

Symbols: 0
Latest comments: