Download  Print this page


<Waiting Time for Connection at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Wait Time for Connecting to a Network(P. 60)
to 300 (sec.)
<Ethernet Driver Settings>
Select the communication mode of Ethernet (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX).
You can also view the MAC address of the machine.
<Auto Detect>
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Configuring Ethernet Settings(P. 57)
<Communication Mode>
<Half Duplex>
<Full Duplex>
<Ethernet Type>
<MAC Address>
Check the MAC address of the machine, which is a number unique to each communication device.
the MAC Address for Wired LAN(P. 44)
<IEEE 802.1X Settings>
Enable or disable IEEE 802.1X authentication.
<Initialize Network Settings>
Select to return the Network Settings to the factory defaults.
Setting Menu List
Configuring IEEE 802.1X Authentication Settings(P. 170)
<Initialize Menu>(P. 235)
Setting a


Table of Contents

   Also See for Canon imageClass LBP162dw

   Related Manuals for Canon imageClass LBP162dw

Comments to this Manuals

Symbols: 0
Latest comments: