Changing Print Settings - Canon imageClass LBP162dw User Manual

◼
Changing the Setting of Functions Available with AirPrint
If you want to disable functions that you are not going to use with AirPrint or encrypt communications, configure the
necessary setting using the Remote UI.

Changing Print Settings

To perform printing with AirPrint, IPP protocol is used.
Turning the Function On/Off
You can specify whether to perform printing with AirPrint. The factory default setting is [On].
Log in to the Remote UI in System Manager Mode (
[Settings/Registration]
Clear or select the [Use IPP Printing] check box
Changing the TLS Setting
You can specify whether to encrypt communications using TLS when performing printing with AirPrint. The factory
default setting is [On].
Log in to the Remote UI in System Manager Mode (
[Settings/Registration]
Clear or select the [Use TLS] check box
Displaying the Screen for AirPrint
You can display the screen for AirPrint, on which you can not only access the AirPrint Settings but also view
information about consumables, such as toner cartridges, etc. Further, you can configure security function settings.
1
Select [System Preferences]
you are using.
● If the machine has already been added, this operation is not required.
2
Select this machine from the list of printers in [Printers & Scanners].
3
Click [Options & Supplies].
4
Click [Show Printer Webpage].
Linking with Mobile Devices
[Network Settings]
[Network Settings]
[OK]
[Printers & Scanners], then add the machine to the Mac
132
Starting Remote UI(P. 179) )
[TCP/IP Settings] [Edit] in [IPP Print Settings]
[OK]
Starting Remote UI(P. 179) )
[TCP/IP Settings] [Edit] in [IPP Print Settings]