The PIN code must be registered within 10 minutes after selecting <Yes> in step 7.
If an error message is displayed during setup
Select <Close> and return to step 6.
From the Operation Panel
Wait until the message <Connected.> is displayed.
Wait several minutes until the IP address and other items are set automatically.
When more than one wireless router is available for connection, the machine connects to the device
with the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).
You can set the IP address manually.
While the machine is connected to the wireless LAN, the Wi-Fi icon is displayed in the Home screen.
Home Screen(P. 87)
Reducing power consumption
You can set the machine to enter <Power Save Mode> based on signals emitted from the wireless router.
<Power Save Mode>(P. 198)
If the IP address of the machine has changed
In a DHCP environment, the IP address of the machine may be changed automatically. If this happens, the
connection is maintained as long as the machine and the computer belong to the same subnet.
Connecting to a Wireless LAN(P. 25)
Setting IP Addresses(P. 37)