Canon imageClass LBP162dw User Manual page 37

If your wireless router is not found
● Check whether the machine is properly installed and ready to connect to the network.
Settings Problems(P. 263)
8
Enter the network key that you have written down.
● Enter the network key, and select <Apply>.
● On how to enter text, see
9
Select <Yes>.
If an error message is displayed during setup
● Select <Close>, check whether the network key is correct, and return to step 5.
10
Wait until message <Connected.> is displayed.
➠
Wait several minutes until the IP address and other items are set automatically.
Signal strength
● When more than one wireless router is available for connection, the machine connects to the device
with the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).
● You can set the IP address manually.
● While the machine is connected to the wireless LAN, the Wi-Fi icon is displayed in the Home screen.
Home Screen(P. 87)
Reducing power consumption
● You can set the machine to enter <Power Save Mode> based on signals emitted from the wireless router.
<Power Save Mode>(P. 198)
If the IP address of the machine has changed
● In a DHCP environment, the IP address of the machine may be changed automatically. If this happens, the
connection is maintained as long as the machine and the computer belong to the same subnet.
LINKS
Connecting to a Wireless LAN(P. 25)
Setting Up
Entering Text(P. 93) .
Setting IP Addresses(P. 37)
32
Installation/