Table 8 – Ranges And Accuracies For Supported Inputs - Newport Pt32 Operator's Manual

PLATINUM Series Controllers User's Guide
Table 8 – Ranges and Accuracies for Supported Inputs
Input Type
Process/Strain Process Voltage
Process Process Current
J Type T/C Iron-Constantan
K Type T/C CHROMEGA®-ALOMEGA®
T Type T/C Copper-Constantan
E Type T/C CHROMEGA®-Constantan
R Type T/C Pt/13%Rh-Pt
S Type T/C Pt/10%Rh-Pt
B Type T/C 30%Rh-Pt/6%Rh-Pt
C Type T/C 5%Re-W/26%Re-W
N Type T/C Nicrosil-Nisil
RTD Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω -200 to 850°C / -328 to 1562°F
RTD Pt, 0.003916, 100 Ω
RTD Pt, 0.00392, 100 Ω
Thermistor 2252 Ω
Thermistor 5K Ω
Thermistor 10K Ω
Code Error Code Descriptions
E001 File not found during load operation
E002 Bad file format during load operation
E003 File read error during load operation
E004 File write error during save operation
E005 Device not found for read or write
operation
E006 Loop break timeout
E007 Autotune timeout
E008 Ramp and Soak program tracking
error
E009 Input signal out of range
Description
±50 mV, ±100 mV, ±1, ±10 Vdc
Scalable within 0 to 24 mA
-210 to 1200°C / -346 to 2192°F
-270 to -160°C / -454 to -256°F
-160 to -1372°C / -256 to 2502°F
-270 to -190°C / -454 to -310°F
-190 to 400°C / -310 to 752°F
-270 to -220°C / -454 to -364°F
-220 to 1000°C / -364 to 1832°F
-50 to 40°C / -58 to 104°F
40 to 1788°C / 104 to 3250°F
-50 to 100°C / -58 to 212°F
100 to1768°C / 212 to 3214°F
100 to 640°C / 212 to 1184°F
640 to 1820°C / 1184 to 3308°F
0 to 2320°C / 32 to 4208°F
-250 to -100°C / -418 to -148°F
-100 to 1300°C / -148 to 2372°F
-200 to 660°C / -328 to 1220°F
-200 to 660°C / -328 to 1220°F
-40 to 120C / -40 to 248F
-30 to 140C / -22 to 284F
-20 to 150C / -4 to 302F
Table 9 – Error Code Descriptions
Code
E010
E011
E012
E013
E014
E015
E016
E017
E017
Specifications
Range
Error Code Descriptions
Communications device not ready (USB,
Serial, etc.)
Communications install error
Failed attempt to open a
communications device
Failed attempt to read from a
communications device
Failed attempt to write to a
communications device
Bad reboot, attempt to reboot from an
unknown source
Signal too unstable to perform auto tune
Can't auto tune because input signal is
on wrong side of setpoint
Can't auto tune because input signal is
on wrong side of setpoint
69
Accuracy
0.03% FS
0.03% FS
0.4°C / 0.7°F
1.0°C / 1.8°F
0.4°C / 0.7°F
1.0°C / 1.8°F
0.4°C / 0.7°F
1.0°C / 1.8°F
0.4°C / 0.7°F
1.0°C / 1.8°F
0.5°C / 0.9°F
1.0°C / 1.8°F
0.5°C / 0.9°F
1.0°C / 1.8°F
0.5°C / 0.9°F
0.4°C / 0.7°F
1.0°C / 1.8°F
0.4°C / 0.7°F
0.3°C / 0.5°F
0.3°C / 0.5°F
0.3°C / 0.5°F
0.2°C / 0.35°F
0.2°C / 0.35°F
0.2°C / 0.35°F