PLATINUM Series Controllers User's Guide
4.3 Level 1 Menu
Initialization Mode: These settings are rarely changed after initial setup. They include
INIt
transducer types, calibration, etc. These settings can be password-protected.
Programming Mode: These settings are frequently changed. They include Set points,
PRoG
Control Modes, Alarms, etc. These settings can be password-protected.
Operating Mode: This mode allows users to switch between Run Mode, Standby Mode,
oPER
Manual Mode, etc.
4.4 Circular Flow of Menus
The following diagram shows how to use the LEFT and RIGHT buttons to navigate around a menu.
Figure 9 – Circular Flow of Menus.
PLATINUM Series Navigation
16