Network Connection; Step By Step - Bayrol PoolManager Chlorine User Manual

4. Please the US memory stick with the software update into
PoolManager internal USB slot.
®
5. Close the front of the casing and turn the power supply back on.
6. Wait until the boot procedure is complete.
This takes approx. 1 - 2 minutes.
7. Select the software update function in the menu as follows:
Service functions

Software update (from USB stick)

8. Press the button Start software update
9. PoolManager automatically performs a restart in order to
®
launch the software update
10. The screen background is black throughout the update. There
are various icons and text messages to inform you about the
software update's progress.
11. The updating process takes about 5 minutes.
Once competed, PoolManager
restart and will boot with the updated software.
12. You can then remove the USB stick. To do so, turn off
PoolManager ® voltage supply.
45

Network connection

Required user qualification:
IT SPECIALIST
The network connection may only be performed by an
IT SPECIALIST as defined in the chapter User
qualification.
PoolManager ® offers comprehensive and very easy opportunities for
remote access from a local network or from the Internet.
In order to use these opportunities, PoolManager
connected to a TCP/IP network (TCP/IP is the transmission protocol
used on networks and the Internet).
In the PoolManager ® terminal box, there is a standard Ethernet slot
(RJ45). A standard network cable (Cat5 or Cat6) can be plugged
into that slot.
The network cable is fed through a special large cable fitting into the
terminal box in order to maintain IP65 rating.
45.1

Step by step

1. Turn off PoolManager ® power supply.
2. Loosen the four screws on the terminal box cover and remove
it.
3. Loosen the large cable fitting on the far left.
® will perform an automatic
has to be
®
79