Notes On Measurement Graph - Bayrol PoolManager Chlorine User Manual

Slow scroll forward and/or backward along the time
axis by one half screen width, i.e. for example, by 12
hours if the screen displays 24 hours.
Quick scroll forward and/or backward along the time
axis by one full screen width, i.e. for example, by 24
hours if the screen displays 24 hours.
Zoom function - opens a selection menu for the time
frame being displayed:
1h / 4h / 12h / 24h / 1 week
Go to date - Opens entry screen for a date.
After entering the date and confirming, the
measurement graph jumps directly to the date
indicated.
Menu - Opens the configuration menu for the
measurement graph
Measurement graph with mutual display of two measured
variables (e.g. pH and redox (mV)):
1 Selection keys for showing one or two measured variables
Pressing a key activates or deactivates display of the
respective measured variable.
The measured variables currently displayed have a light
background.
A maximum of 2 measured variables can be activated (it
may be necessary to deactivate a measured variable first
before another can be activated)
2 Scale for the first measured variable shown (e.g. pH)
3 Scale for the second measured variable shown (e.g. mV)
4 Measured value curve for the first measured variable
(e.g. pH)
5 Measured value curve for the second measured variable
(e.g. mV)
6 Alarm status (flow only)
A missing flow signal (flow alarm) is indicated with a red
bar in the corresponding time frame.
Measurement graph with break
(PoolManager ® was turned off):
1 Point in time turned off
2 Point in time turned on
The device was turned off between point in time 1 and point in time 2.
That is why there are no measured values shown for that range.
Measurement graph (Bayrosoft
®
1 During O2 (Bayrosoft ) dosing, the current dosage volume
®
is displayed in litres. The measured value curve climbs
from 0 to the total dosage volume. In this example, that
number is 2 litres.
2 The measured value curve shows 0 litres for times at
which no dosage is applied.
3 For better orientation, the programmed basic dosage
volume is shown.
10.2

Notes on measurement graph:

The value range displayed (measured value scale) is set automatically
in order to ensure optimal display of the corresponding situation. The
value range can also be set manually as needed. However, we
recommend using automatic scaling.

The following alarm statuses are indicated in the measurement
graph.
Alarm Designation
No flow signal Flow
(flow alarm)
Level alarm Level
Dosing alarm Dos.

Alarms are displayed for as long as they are active. It does not
matter whether they were acknowledged or not.
):
25