Hardware Resources (Inputs And Outputs) - Bayrol PoolManager Chlorine User Manual

33

Hardware resources (inputs and outputs)

The simultaneous use of numerous add-on functions is limited by the
hardware resources available. This includes the following inputs and
outputs:

Relay switch outputs OUT 1 ... OUT 4

Universal switch inputs IN 1 ... IN 4

Temperature inputs Temp.1 ... Temp.3

Current outputs (optional plug-module PM5-SA4)
Add-on functions can only be activated if the requisite hardware
resources are still available.
INFO
Add-on box (feature box)
An external add-on box (feature box) with supplemental
inputs and outputs is in development to overcome
these limitations.
The menu Add-on functions shows the resources that are already
being used:
In the example shown, the following resources are used:
Add-on function
Universal switch output 1
"Water fall"
Universal switch output 2
"Underwater lights"
Filter pump
Flockmatic pump
®
When inputs and outputs are allocated to a certain function, these
resources are deactivated (greyed) in the corresponding selection
menus.
They are shown in grey lettering and cannot be selected. The previous
function may have to be deactivated first. The following figure shows
an example:
utilised resources
Relay switch output OUT 1
Switch input IN 1
Relay switch output OUT 2
Switch input IN 2
Relay switch output OUT 3
Relay switch output OUT 4
Relay switch output pH+
(This output can only be used if no
pH plus dosing is being used)
1 Current selection (white background)
2 Additional selection options
(free resources, white lettering)
3 Deactivated selection options
(resources already being used, grey lettering)
4 Selection "none"
The corresponding function is no longer linked with a
resource and therefore cannot be activated.
The corresponding resources are available for other
functions.
69