Mode Menu - Bayrol PoolManager Chlorine User Manual

9.1.4

Mode menu

The mode menu can be called up at any time using the Mode hotkey.
It makes it possible to turn most system functions on and off and to set
the operating mode quickly and easily. Each function is shown on one
line within the mode menu.
1 Description of the function
2 Configured operating mode (operating modes depend upon
the corresponding function). The operating mode can also
be changed here.
3 Buttons for turning a function on and off quickly
Green button The function is turned on.
Touching the button turns the function off.
Grey button The function is turned off.
Touching the button turns the function on.
4 Joint button for turning off ALL functions shown in the mode
menu (emergency stop).
Button function
Button The function is definitely turned off (regardless of the
off operating mode set)
Button The function is automatically turned on and off
on depending on the operating mode set (e.g. time
controlled). 'Button on' does NOT necessarily lead to
the function being turned on immediately.
Info
Return to time-controlled operation
If the buttons in the Mode menu are used to turn a
function on or off, while this function is in the "Time
switch" operating mode, the function automatically
returns to time-controlled operation at the next
programmed switching point.
TIP
Use buttons for turning on and off directly
In order to use the buttons for turning functions on and
off directly, set the function's operating mode to 'on.' In
this configuration, the buttons in the mode menu switch
directly between 'on' and 'off'.
9.2 Further menus (standard menus)
Most menus, by far, consist of multiple recurring standard elements,
which can be combined with each other in a menu as desired. That is
why this menu type is referred to as standard menu.
9.2.1 Basic concepts
Max. 8 lines
Each menu consists of a max. of 8 lines
(Menu title and max. 7 standard elements).
Menu title
The first line always contains the menu title.
Buttons and text fields
In general, there are buttons and text fields in all menus. Buttons are
shown with a subtle 3D effect. Text fields do not have the 3D effect.
You can actuate buttons by lightly tapping on the touchscreen, thereby
triggering the underlying function. Text fields, however, only display
information and cannot be actuated.
Help function
Tapping on a parameter name will make a help text for that parameter
appear.
Parameter configuration
Tapping on a parameter value will open an entry screen and the
respective parameter can be configured.
The various standard elements are described in the following sections.
9.2.2 Numerical parameters
A numerical parameter is a numerical value. A numerical parameter
can be changed by the operator, in case it is a configuration
parameter. However, there are also numerical parameters that are
displayed only and cannot be changed, e.g. measured values.
1
1 Parameter name (button)
Calls up the parameter's help text
2 Parameter value (button or text field)
If the parameter is configurable, then the parameter value will
be shown as a button. That will call up an entry screen in
which the value can be configured.
3 Physical unit (text field)
2 3
17