User Login With Access Code; User Selection - Bayrol PoolManager Chlorine User Manual

22
22.6

User login with access code

Most parameter changes and access to some menus require
authentication with a certain user level. If authentication is required,
then the menu User login will appear automatically.
In this menu, first select the user you would like to use for login. Then
enter the correct access code for the selected user. If the access code
entered is correct, then you'll be granted access to the desired
parameter or menu.

After successful login, the corresponding user level will remain
valid until you return to Home view; or, after several minutes the
screen is returned to Home view automatically.

No new login is necessary for as long as the user level is still
valid. The menu User login will only appear again for accessing
functions requiring a higher user level.
The menu User login is set up as follows:
1 Menu title indicating the requisite
minimum user level for the desired function
2 Selection of the desired user.
The default setting is that the last selected user is
displayed if that user's level is sufficiently high.
Otherwise, the standard user is displayed with the requisite
minimum user level.
3 Enter access code for the selected user.
4 The default setting is for the entered code to be masked
(****). This button can be used to display the actual code.
5 Number keypad for code entry.
6 Cancel will close the entry screen.
7 OK confirms the entries. Once authentication has been
successful, you'll be forwarded to the desired menu.
Delete the last number
Delete the entire access code
52
22.6.1

User selection

If the user selection screen is opened in the menu User login (2), then
it will be displayed as follows:
1 Menu title, with indication of session
(Local or remote access)
2 Currently selected user (white background)
3 Further potential for the desired function (White lettering)
4 Users to whom access to the desired function is not
granted (grey lettering)
5 Default user
6 Cancel will close the selection screen.
7 OK will confirm the selection and return to the menu
User login.
There may be various causes for a user not being selectable and
therefore being displayed in grey lettering:

The user level is too low for the desired function

Only for remote access:
The required user level for the desired function is higher than that
of the current user in remote access