Part A: Overview - Bayrol PoolManager Chlorine User Manual

Part A: Overview

1 Identification of safety information
1.1 Safety information
HAZARD!
Hazard identification
Hazard description
Description of (potential) consequences
Measure to be undertaken in order to avoid this hazard.
HAZARD DUE TO VOLTAGE!
Hazard identification
Hazard description
Description of (potential) consequences
Measure to be undertaken in order to avoid this hazard.
Required user qualification:
USER QUALIFICATION (description)
Explanatory text...
1.2 Miscellaneous markings
IMPORTANT NOTICE!
Brief description
Informational text...
INFO
Brief description
Information...
INFO
The corresponding section applies only for the
PoolManager ® version(s) indicated
TIP
Brief description
Tip...

Chapter name (printed in italics) indicates a chapter within this
document

Menu name (printed in italics) indicates a menu in PoolManager

Parameter name (printed in italics) indicates a parameter in
PoolManager ®

[n] (designation) indicates the number of a terminal block (in
squared brackets) and its designation (printed in italics in round
brackets)

[Unit] indicates a physical unit, e.g. [°C] or [mg/l]
2 General safety information
This user manual has basic information that should be observed
during assembly, start-up, operation, and maintenance. Therefore, this
user manual absolutely must be read by installers and operators prior
to assembly and start/up, and must be accessible to every user of this
device. Additionally, all further safety information in this document
absolutely must be observed.
Read and follow all instructions.
In order to minimise the danger of injury, do not allow children to use
this product.
Hazards from non-compliance with safety information
Non-compliance with safety information can result in hazards to
persons, the environment, and the equipment.
Non-compliance with safety information will result in a forfeit of any
potential right to damage compensation.
HAZARD!
Unexpected start
PoolManager ® starts operation as soon as there is
voltage on the incoming power line. It is possible that
dosing pumps start or that add-on functions are turned
on or switched.
Potential consequence: Death or the gravest degree
of injury, heavy material damage.
 Be sure that PoolManager
unauthorised access.

Do not supply PoolManager
preparations for a safe start and safe operation
have been completed.
HAZARD!
Potential overdosing of maintenance products
Despite PoolManager's
functions, it's possible that a sensor failure and other
errors could lead to an overdosing of maintenance
products.
Potential consequence: Death or the gravest degree
of injury, heavy material damage.
 Design your installation such that uncontrolled
dosage is not possible in the event of a sensor
failure or other errors, and/or such that uncontrolled
dosage is recognised and halted before damage is
incurred.
HAZARD!
Gaseous chlorine produced from dosing in
standing water if dosing outputs are not locked via
the filter pump
If the flow switch is stuck or experiences another error,
there is a risk of dosing into standing water. Poisonous
chlorine gas can be yielded when sodium hypochlorite
and pH minus come together.
Potential consequence: Death or the gravest degree
of injury, heavy material damage.
®
® is secured against
with power until all
®
® comprehensive safety
7