Selection Parameters - Bayrol PoolManager Chlorine User Manual

9
9.2.2.1 Entry screen
There is one uniform entry screen for all numerical parameters, in
which values can be configured.
1 Parameter name
2 Display of current setting (or current input)
3 Number block for entering the value
4 Minimum potential setting
5 Maximum potential setting
6 Button for resetting to the default value
7 Cancel will close the entry screen.
The value will remain unchanged.
8 OK will apply the configured value and save it
permanently.
Incremental increase or decrease of the configured value.
A sensible step size is automatically set for each
parameter.
Delete the last character
Delete the entire value
9.2.3

Selection parameters

For selection parameters, one of multiple settings can be selected,
e.g. 'active' or 'inactive'. The selection usually can be configured by
the user. However, there are also selection parameters that are only
displayed, but cannot be configured, such as system status.
1
1 Parameter name (button)
Calls up the parameter's help text
2 Parameter value (button or text field)
If the parameter is configurable, then the parameter value will
be shown as a button. That will call up an entry screen in
which the value can be configured.
18
9.2.3.1
There is one uniform entry screen for all selection parameters which is
used to change selection parameter settings.
1 Display of all selection options.
Tap on the desired option to activate it.
2 Button for resetting to the default value
3 Cancel will close the entry screen.
The value will remain unchanged.
4 OK will apply the configured setting and save it
permanently.
There are also selection parameters for which multiple selections are
possible; such as multiple weekdays on which a certain process
should be launched.
In this case, each selection option can be activated and deactivated by
tapping on it.
2
For several selection parameters, a symbol is shown for each
selection option in addition to the text, such as a flag to select the
menu language.
Entry screen