Real Time Clock (Rtc) Overview - Baldor VS1GV21-1B Installation & Operating Manual

P# Type
815 MOTOR VOLTS
816 MOTOR SPEED
817 BUS VOLTAGE
818 DRIVE TEMP

12.2 Real Time Clock (RTC) Overview

Action Module
Action Module parameters P3601 - 3602 set the actions to be scheduled. Action 2 takes priority over action 1 should
both be scheduled to trigger within the same second. So, if action 1 turns on output 1 and action 2 turns off output 1
and they both trigger on the same seconds tick, then output 1 will appear as though to never turn on.
As a rule, once an action is taken it is latched until it is reset by another action.
Action Module selections are shown in Table 12-2.
12-6 Monitor and RTC Description
Table 12-1 Monitor Parameters Descriptions Continued
Name Unit
V
RPM
V
°C
Figure 12-1 RTC Features
Action Module
P3601-3602
P3605-3606
P3609-3610
RTC
Message Module
P3603-3604
P3607-3608
P3611-3612
Motor Voltage. Fault trace signal: instantaneous voltage to motor
Motor Speed. Fault trace signal: motor instantaneous rotor speed
Bus Voltage. Fault trace signal: instantaneous bus voltage
Drive Temperature. Fault trace signal: drive temperature
Operating Modes
Alarm System
Help
MN765