Baldor VS1GV21-1B Installation & Operating Manual page 115

Parameter (Number)
Block Title
RTC ACTION 1 (3601)
RTC
FEATURES RTC ACTION 2 (3602)
(Continued) (Continued)
R.Out1 On/IncP107 (18)
R.Out1 Off/IncP107 (19)
R.Out1 On/DecP107 (20)
R.Out1 Off/DecP107 (21)
RTC MESSAGE 1 (3603)
RTC MESSAGE 2 (3604)
ACT 1 QUALIFIER (3605)
ACT 2 QUALIFIER (3606)
MN765
Table 7-3 Level 3 Parameter Block Definitions Continued
Selection (Value)
D.Out1 On/Reset (16)
D.Out1 Off/Reset (17)
R.Out1 On/Reset (22)
R.Out1 Off/Reset (23)
First action taken as a result of an edge from the RTC. See Chapter 12.
Second action taken as a result of an edge from the RTC. See Chapter 12.
Preset Value: 0
Preset Value: 0
Range: 0 - 8
None (0)
Clean Filter (1)
Change Filter (2)
Apply Oil/Lube (3)
Lube Mtr. Brngs (4)
Service Drive (5)
Service Coolant (6)
Service Heating (7)
RTC Alarm (8)
First message sent as a result of an edge from the RTC. See Chapter 12.
Second message sent as a result of an edge from the RTC. See Chapter 12.
Preset Value: 0
Preset Value: 0
Range: 0 - 6
Once (0)
Second (1)
Minute (2)
Hourly (3)
Daily (4)
Monthly (5)
Yearly (6)
Schedule qualifier for the RTC action 1. See Chapter 12.
Schedule qualifier for the RTC action 2. See Chapter 12.
Parameter Name and Description
Parameter Descriptions 7-37