Technical Specifications; Tools Needed For Installation; Accessories In Machine - GIRBAU HS-6040 Installation Instructions Manual

1. TECHNICAL SPECIFICATIONS

Justification of the Design regulation.
HS-6040, HS-6057, HS-6110 models. As they have a net drum volume higher than 150 l, they must follow EN
60204-1 standard.

Tools needed for installation

HS-6040; HS-6057; EH090; EH130

Shipping restraints ............................ open end wrench 7/8 in. (22mm)

Shipping restraints ............................ offset ring wrench 7/8 in. (22mm)

Covers fixing ..................................... wrench 1/2 inch. (13mm)

Covers fixing .................................... TORX T20 screwdriver.

Water inlet pipes ............................... adjustable wrench or slip-joint pliers; 1.5 in. (36 mm) opening.

Water and steam inlet filters ............. adjustable wrench or slip-joint pliers; 1.8 in. (45mm) opening.
HS-6110; EH255

Shipping restraints ............................ open end wrench 15/16 inch. (24mm)

Shipping restraints ............................ offset ring wrench 15/16 in. (24mm)

Covers fixing ..................................... wrench 3/8 in. (10mm); 1/2 in. (13mm)

Covers fixing .................................... TORX T20 screwdriver.

Water inlet pipes ............................... adjustable wrench or slip-joint pliers; 2.5-2.8 in. (65-70 mm)
opening.

Water and steam inlet filters ............. adjustable wrench or slip-joint pliers; 2.5-2.8 in. (65-70 mm)
opening.
Common to all models

Clamps .............................................. nut driver 7mm

Electrical requirements ................... Phillips 2 screwdriver. (#2)

External dosing connection .............. slotted-head screwdriver 3mm.

Accessories in machine

Keep all machine instructions in a safe place.
ACCESSORIES
Drain hose (1) ......................................
Drain clamp (1) ....................................
Water inlet hose (1) .............................
Set of water inlet hose filter .................
Water inlet hose seals (1) ...................
Steam outlet elbow ..............................
Steam outlet elbow clamp ...................
Steam inlet valve and filter (5) ............
Steam inlet coupling (6) .......................
Fuses ................................................... (7)
Installation Instructions ........................
Operation Instructions .........................
Parts handbook (1) ..............................
Other documentation .......................... (8)
Technical specifications
QUANTITY
1 (2)
1 (2)
1 (2)
2 (3)
4 (4)
1
1
1
1
1
1
1
NOTES
(1) not available USA/Canada machines
(2) machines with double drain: 2 units
(3) machines with third water inlet: 3 units
(4) machines no USA/Canada with third
water inlet: 6 units
(5) steam connection accessories in TILT
machines: refer to section 3.4.
(6) only machines in USA / Canada NO
TILT with steam
connection accessories
machines: refer to section 3.4.
(7) depending on model and voltage
(8) depending on target country
7
heating Steam
in TILT
Cod. 511485
Rev.07/0717