Hs-6110, Eh255 Models - GIRBAU HS-6040 Installation Instructions Manual


Assemble the toe plate (Fig. 2.9).

Fit the perforated metal plate onto the lower aperture at
the back of the machine.

Both protections are dispatched dismantled from the rest
of the machine, and the securing screws are screwed
into the respective securing points.

TILT models. Assemble all the guards of the tilt system
(section 5.7.)

2.6.2. HS-6110, EH255 models


Remove the screws securing the side guards at the top.
Loosen the screws holding the lower guard and separate
them from the machine (Fig. 2.10/A. B).

Locate the four yellow fixing angles (Fig.2.11/A) and
disassemble them.
(In order to avoid the movement of the floating chassis
during transport, the 8 fixing screws are firmly tightened.
Use appropriate tools)

Assemble the side covers

Assemble the toe plate (Fig. 2.12).

Fit the perforated metal plate onto the lower aperture at
the back of the machine.

Both protections are dispatched dismantled from the rest
of the machine, and the securing screws are screwed
into the respective securing points.

TILT models. Assemble all the guards of the tilt system
(section 5.7.)
Transport and location
24
Fig. 2.9
Fig. 2.10
Fig. 2.11
Fig. 2.12
Cod. 511485
Rev.07/0717