GIRBAU HS-6040 Installation Instructions Manual page 19

Transporting crated machines
To move the machine when crated (Fig. 2.1) use best a forklifts, introducing the forks (A) in the space between
the base of the packaging and the floor, using the maximum width permitted by the crating. In those cases in
which this transport method is not possible and the machine must be lifted by a crane:
HS-6040, HS-6057, EH090, EH130:
Place the slings under the crating.
ATTENTION!
THE POSITIONING OF THE SLINGS MUST BE
DONE AS SHOWN IN FIG. 2.2. OTHERWISE
THE CRATING AND THE WASHER COULD BE
DAMAGED.
HS-6110, EH255
Remove the two small covers located in the upper part of
the washer (Fig. 2.3). The transport handles are visible and
accessible through the crating.
Once this operation is over, replace and lock the
covers correctly.
Transport and location
19
Fig. 2.2
Fig. 2.3
Cod. 511485
Rev.07/0717