Technical Specifications - GIRBAU HS-6013 Installation Instructions Manual

1. TECHNICAL SPECIFICATIONS

1.1 Tools needed for installation
•
Shipping restraints ...........................open end wrench 11/16 in. (17mm).
•
Shipping restraints ...........................tubular wrench 11/16 in. (17mm)
•
Clamps .............................................nut driver 7mm
•
Water inlet filters ..............................open end wrench 1-3/8 in. (34mm)
•
Covers fixing ....................................open end wrench 1/2 in. (13mm)
•
Water inlet hoses
•
Covers fixing ....................................TORX T25 screwdriver
•
Covers fixing ....................................TORX T20 screwdriver.
•
Electrical connection .......................Phillips 2 screwdriver (#2)
•
External dosing connection ............slotted-head screwdriver 3mm
•
Vending circuit connection................slotted-head screwdriver 3mm & Philips 1 (#1)
1.2 Standards
Compliance with the safety standard for Industrial Laundry Machinery, EN ISO 10472:
•
Electrical Control Design following standard EN-60204-1
•
Electromagnetic Compatibility: compliance with standard EN 61000-6-1; EN 61000-6-3; EN 61000-3-11.
1.3 Accessories in machine
Keep all machine instructions in a safe place.
ACCESSORIES
Drain hose ...........................................
Drain clamp..........................................
Cold water inlet hose (1) ....................
Hot water inlet hose (1) ....................
Water inlet coupling ............................
Water inlet filter....................................
Water inlet hoses gaskets ...................
Steam inlet filter and valve (6) .............
Water inlet coupling (7).......................
Top cover key ......................................
Coin meter box key (8) (9)...................
Tokens (8) (9) ..................................... 10
Fuse ..................................................... 1 x 10A
Fuse .................................................... 3 x 1A
Installation handbook...........................
Operation handbook ...........................
Parts handbook (1) ..............................
Documentation .................................... (9)
Technical Specifications
................slip-joint pliers or pipe wrench diam. 1-1/2 in. (35 mm).
QUANTITY
1 (2)
1 (2)
1
1 (3)
2 (4)
2 (4)
6 (5)
1
1
1
1
1
1
1
NOTES
(1) not available USA / Canada
(2) machines with dual drain: 2 pieces
(3) machines with third water inlet: 2 pieces
(4) machines with third water inlet: 3 pieces
(5) machines with third water inlet: 9 pieces
(6) steam heating machines
(7) only machines in USA / Canada with
steam heating
(8) Coin Control models only
(9) depending on target country
7
Cod. 429043
Rev. 02/1206