Interfaces - Agilent Technologies G1313A Reference Manual

Table 49
Interface Type Pumps
CAN Yes
GPIB Yes
RS-232C Yes
Remote Yes
Analog Yes
Interface board Yes
*
The vacuum degasser will have a special connector for specific use. For details see description of main board.
WA R NI NG
Theory of Operation

Interfaces

Interfaces
The Agilent 1100 Series modules provide the following interfaces:
Agilent 1100 Series Interfaces
DA Detector
MW Detector
Autosampler FL Detector
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No 2 ×
Yes Yes
• CAN connectors as interface to other Agilent 1100 Series modules,
• GPIB connector as interface to the Agilent ChemStation,
• RS-232C as interface to a computer,
• REMOTE connector as interface to other Agilent products,
• Analog Output connector(s) for signal output, and
• Interface slot for specific interfacing (external contacts, BCD, LAN and
so on).
For identification and location of the connectors Figure 6 on page 27.
Never use cables other than the ones supplied by Agilent Technologies
to ensure proper functionality and compliance with safety or EMC
regulations, see "External Tray G1313-60004" on page 184.
Thermostatted
VW Detector Column
RI Detector Compartment
Yes Yes
Yes Yes
Yes Yes
Yes Yes
1 × No
Yes No
Vacuum
Degasser
No
No
No
Yes
*
Yes
No
231