Figure 1
Solvent cabinet
Vacuum degasser
Pump
Autosampler or
Micro Autosampler or
Preparative Autosampler
Column compartment
Detector
Installing the Autosampler
Optimizing the Stack Configuration
Optimizing the Stack Configuration
If your autosampler is part of a system, you can ensure optimum
performance by installing the autosampler in the stack in the position
shown in Figure 1 and Figure 2. Figure 3 and Figure 4 show the
configuration recommended for a thermostatted autosampler. These
configurations optimize the system flow path, ensuring minimum delay
volume.
Recommended Stack Configuration for an Autosampler (Front View)
22
Control module