Using The Esd Strap - Agilent Technologies G1313A Reference Manual

CA UT IO N
1 Unwrap the first two folds of the band and wrap the exposed adhesive side
2 Unroll the rest of the band and peel the liner from the copper foil at the
3 Attach the copper foil to a convenient and exposed electrical ground.
Figure 14
Repairing the Autosampler

Using the ESD Strap

Using the ESD Strap
Electronic boards are sensitive to electrostatic discharge (ESD). In order to
prevent damage, always use an ESD strap supplied in the accessory kit when
handling electronic boards and components.
Using the ESD Strap
firmly around your wrist.
opposite end.
Using the ESD Strap
105