Metering-Drive Motor And Belt - Agilent Technologies G1313A Reference Manual

Frequency
Tools required
Parts required
Before beginning this procedure:
❏ Remove the top cover (page 128).
❏ Remove the transport assembly (page 132).
❏ Remove the sampling unit (page 134).
8 Remove the four fixing screws.
Repairing the Autosampler

Metering-Drive Motor and Belt

Metering-Drive Motor and Belt
When belt or motor defective
Pozidrive No. 1 screwdriver
Metering-drive motor 5062-8590
Belt 1500-0697
142
7 Disconnect the motor connector from the
SUD board (labelled "Metering M").
9 Remove the motor.