Needle-Drive Motor And Belt - Agilent Technologies G1313A Reference Manual

Frequency
Tools required
Parts required
Before beginning this procedure:
❏ Remove the top cover (page 128).
15Disconnect the motor connector from the SUD
board (labelled "Needle M").
Repairing the Autosampler

Needle-Drive Motor and Belt

Needle-Drive Motor and Belt
When defective
Pozidrive No. 1 screwdriver
Needle-drive motor 5062-8590
Belt 1500-0697
144
14 Lift away the drive belt.
16Remove the metering head assembly (see
"Gripper Arm" on page 123).