Top Cover And Foam - Agilent Technologies G1313A Reference Manual

Frequency
Tools required
Parts required
CA UT IO N
1 Switch off the autosampler at the main power
switch. Remove the power cable.
3 Move the safety lever to the left.Lift the clips
on the top cover.
safety lever
CellFrame
Repairing the Autosampler

Top Cover and Foam

Top Cover and Foam
When accessing internal parts.
If interface board installed: Flat-head screwdriver.
Foam kit G1313-68702
This procedure requires removal of the MIO-interface board. The board is
sensitive to electrostatic discharge. Always use the ESD strap when handling
electronic boards.
clip
128
2 If installed, remove the ECB board.
4 Lift the cover away.
CellFrame