Frequency
Tools required
Parts required
Figure 18
Repairing the Autosampler
Transport Assembly
Transport Assembly
Sticking or jammed transport assembly.
Defective flex board or sensors.
If interface board installed: Flat-head screwdriver.
Transport assembly G1313-60009 for G1313A
Transport assembly G1329-60009 for G1329A - 1389A - G2260A
1 Remove the top cover, top plate, and foam (see "Top Cover and Foam" on
page 128).
2 Lift out the transport assembly. This may require a flat head screwdriver to
separate the transport assembly from the sampling unit
Removing the Transport Assembly
132